Model No.: 600t/d
Pyrethrum ester is a kind of broad spectrum insecticide that can prevent a variety of insect pests .Its insecticidal toxicity increase 10-100 times than the older generation such as organochlorine, organophosphorus and carbamate pesticides. Pyrethrum ester is small for environmental pollution because of low concentration and low dosage.
Vegetable Oil Extraction LineProcess Workflow
Oil Extraction Section → DTDC Desolventizer Toaster Dryer Cooler → Oil Filtration Section → Evaporation and Separation Section → Solvent Condensation and Recovery System → Paraffin Absorption System → Water Solvent Separation and Recovery System → Automatic Control System
(1) Oil Extraction Section
Customers can choose rotocel extractor or drag chain extractor based on their requirements. For different raw materials, grid trays clearance and grid trays arrangement will be properly adjusted to ensure that the oil residues in seed meal is minimum. In addition, liquids in seed meal will be completely drained off, which contributes to minimum solvent content. As a result, the burden imposed on desolventizing device in sequential process will be greatly alleviated, which further reduces steam consumption.
(2) DTDC Desolventizer Toaster Dryer Cooler
The machine consists of pre-desolventizing layer, heat exchange layer, desolventizing layer, heat recovery layer, drying layer and cooling layer. Materials levels at each layer can be automatically controlled. Full utilization of secondary steam reduces steam consumption. Mixed steam will be used to heat miscella after meal foam removal, which further saves energy. The process features thorough desolventizing, light yellow meal, complete passivation of antinutritional factors, short time required for high temperature desolventizing and low loss of meal NSI.
(3) Oil Filtration Section
The process is designed to filter out solid impurities prior to miscella evaporation. Devices used include high pressure delivery pump, centrifugal separator and filter with slagging function. Optimum filtration effect can be achieved by combination of centrifugal separation precise filtration. Since the filter is able to remove slags automatically, no manual operation is required.
(4) Evaporation and Separation Section
Devices used in the process contains evaporator, disc stripping tower, flash separator, heat exchanger and vacuum unit. Under a vacuum and negative pressure condition, solvent in the miscella will be evaporated and separated by rising film evaporation and direct stripping. After thorough desolvation, bright color leached oil will be obtained. To ensure system stability and reliability, an automatic PLC control system is adopted for control of evaporating temperature and vacuum level. Both mixed steam and power steam for vacuum pump will be sufficiently used for evaporation. Heat transfer and mass transfer between cool and hot medium furthers reduces steam consumption. In addition, lipid oxidation can be prevented as well.
(5) Solvent Condensation and Recovery System
The system mainly consists of condenser and circulating cool water system. Under the vacuum condition, condensable solvent steam is condensed into liquids for cyclic utilization through dividing-wall heat transfer. Multiple-pass structure of the condenser and proper settings of flow rate and speed of circulating water will greatly improve efficiency of condensation and separation and largely reduces investment capital and operating cost. In addition, tube plates, baffle plates and heat exchange tubes are all made of stainless steel, which facilities cleaning and withstands corrosion. Moreover, great condensation effect and long service life can be fully ensured.
(6) Paraffin Absorption System
The system consists of Paraffin absorption column,Paraffin desorption column,hear exchanger,storage tank, punp,Exhaust gas blower and so on. It is able to recycle more than 98 percent solvent in the exhaust gas, which reduces solvent loss and protects environment at the same time.
The system makes use of food-grade liquid paraffin to adsorb solvent gas mixed in exhaust gas. The solvent steam will be distilled and separated with the help of superheated steam. Then the solvent steam obtained will be recycled through condensation. To ensure stable absorption efficiency and system reliability, automatic control devices are applied to control important parameters such as flow rate, temperature and pressure.
(7) Water & Solvent Separation Section
The system consists of solvent-water separator, boiling tank,and fresh solvent pump. It separates water from solvent based on the principle that water repels solvent and two liquid layers will be formed in their mixture. To ensure stability and reliability of the system, automatic control devices are applied to control important parameters such as flow rate, temperature and material level.
(8) Automatic Control System
In our production lines, we make use of Siemens PLC control system, which is one of mainstream automatic control systems in today`s industry. The efficient, stable and advanced DCS control system consists of operation station, control station and communication network. We utilize high-speed and large-capacity S7-400 series PLC at the control system, large-screen LCD at the operation station, WINCC 7.0 industrial control software as monitoring software and PROFIBUS filed bus network for communication.
We also provide the following project and equipment:
Oilseed Pretreatment Project
Oilseed Pressing Project
Oil Extraction Project
Oil Refining Project
Cottonseed Miscella Refining Project
Low Temperature and Edible Soybean Meal Project
Soy Protein Concentrate Project
Soy Protein Isolate Project
Cottonseed Protein Project
Full Fat Soybean Power Project
ASME Pressure Vessel
ASME Heat Exchanger
Shandong ChemSta Machinery Manufacturing Co.,Ltd.
Shandong ChemSta Machinery Manufacturing Co.,Ltd. is a national high-tech enterprise, which is invested and controlled by Jining Machinery Design and Research Institute.It integrates scientific research, manufacturing, installation and service together.
Located in high-tech development zone of Jining city of Shandong province, our company is close to Mountain Tai in the north and next to Weishan Lake in the south. Beijing-Shanghai high-speed railway and Grand Canal all run through the city. There is expressway connecting our company directly to Qingdao port. In addition, Jining airport has opened multiple airlines to Beijing, Shanghai and Guangzhou. To sum it up, the traffic is very convenient.
Now, there are about 460 employees in our company. Our technical staff consists of 5 application researchers, 56 senior engineers and 46 engineers. Fixed assets we own worth 180 million yuan in total. Cover area of our factories reaches 66,000 square meters.
We insist on the concept that sustainable development can be ensured by thinking from customers` perspectives. With 30 years experience of oil production technology and enterprise management, we are capable of providing mature and high quality products. Meanwhile, we pay more attention on technology research and development for energy conservation, environment protection, control system intelligence to create more customer value and improve user experience. In addition, we will train operators at the production site and teach operating instructions until they can ensure normal operation of the production lines on their own.
As for our technology achievements, we have won national important new products award, national torch program award, mechanical industry technology progress award, over 30 items of national patent for utility models and software copyright. Our company has been successively rated as provincial engineering technology research center for production of grain and oil processing equipment and provincial enterprise technology center.
As an international supplier for vegetable oil equipment and vegetable protein equipment, our company has built up great reputation in the industry of oil and protein. We provide vegetable oil production lines, refining lines, low temperature soybean meal production lines, soybean protein concentrate production lines, soybean protein isolate production lines, cottonseed protein production lines, natural pigment extraction lines and production line for harmless disposal of dead livestock and poultry. In addition, we also offer large-scale drying machines, chemical pressure vessels, electrical control systems, common mechanical equipment.
With excellent processing equipment, complete manufacturing system, professional manufacturing and installing teams, we have successfully established over 200 vegetable oil production plants and vegetable protein production plants for our customers. Our production lines and relevant pressure vessels have been successfully sold to many countries such as Russia, America, Canada, Vietnam, Pakistan, the Philippines and Thailand and they have been very well received by our customers. We sincerely welcome users from all over the world to visit our company and discuss about cooperation with us.
- Company Name: Shandong ChemSta Machinery Manufacturing Co.,Ltd.
- Representative: Zhang Ming
- Product/Service: Vegetable Oil Processing Project , Vegetable Protein Production Project , Natural Product Extraction Project , ASME Pressure Vessel , ASME Heat Exchanger , Horizontal Dryer
- Capital (Million US $): 30,000,000RMB
- Year Established: 2007
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: Above 20
- No. of R&D Staff: Above 100 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 50,000-100,000 square meters
- Factory Location: Chongwen Avenue #1688, Jining, Shandong, China
- Contact Person: Mr. Chen Weichuang
- Tel: 86-0537-2325087
Premium Related Products